1 / 6
Crank cover for Cannondale Hollowgram MTB cranks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A crank cover to replace the expensive and fragile boots made by Cannondale (P/N CP2401U10OS).
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 38
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Drill a 3mm hole in the bottom if you are concerned about water being trapped when the crank is stored in the down position.
Printed in PETG with variable layer height (0.2mm max, ~0.11mm near the top). No supports or brim needed.
To install: Remove pedals, slip over crank, then reinstall pedals.