1 / 6
Crank cover for Cannondale Hollowgram MTB cranks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A crank cover to replace the expensive and fragile boots made by Cannondale (P/N CP2401U10OS).
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Drill a 3mm hole in the bottom if you are concerned about water being trapped when the crank is stored in the down position.
Printed in PETG with variable layer height (0.2mm max, ~0.11mm near the top). No supports or brim needed.
To install: Remove pedals, slip over crank, then reinstall pedals.