Lingbo controller jumper cable adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter that makes you fit jumper cables into a Lingbo scooter controller quite easily.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 38
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Adapter that makes you fit jumper cables into a Lingbo scooter controller quite easily. (at least fits my LBC006.555D)
No more fiddling to have your jumper cables put on the correct pin and no more dismounting of the controller from the scooter.
Just insert the jumper cables through the lid (from top), insert them through the plug body, slide the lid onto the body and glue it together - you'll definitely want to glue the jumper cables into the plug, too.
Before glueing I'd suggest to try if it fits nicely for you though! Does perfectly for me. As I printed in ASA, I resized the XY plane by 0.5% though to account for shrinkage.
Print as oriented - 0.4 nozzle works good - 0.6 might work out, too, though tolerances will probably become a bit rougher.