1 / 3
DJI Mini 3 Pro Remix of landing feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DJI Mini 3 Pro Remix of landing feet
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 657
- Makes
- 4
- Views
- 2,178
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
by wichiman
I made some changes. I found the clamp was too narrow so it was hard to clip on. I cut the opening a little bit. Also I made the feet thinner, from 5 to 3 mm, but without the clamp. It is still 5mm thick.
I recommend PETG for its flexibilty and a brim (I used 3.6mm)