1 / 3
DJI Mini 3 Pro Remix of landing feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DJI Mini 3 Pro Remix of landing feet
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 657
- Wydruki
- 4
- Wyświetlenia
- 2176
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (85)Powiązane
by wichiman
I made some changes. I found the clamp was too narrow so it was hard to clip on. I cut the opening a little bit. Also I made the feet thinner, from 5 to 3 mm, but without the clamp. It is still 5mm thick.
I recommend PETG for its flexibilty and a brim (I used 3.6mm)