1 / 1
Small Modular Parts Storage (for Totem Maker) — image 1

Small Modular Parts Storage (for Totem Maker)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A set of small modular drawers that I use to store the many parts in the Totem Maker and Totem Robotics System.

Rating
0 / 5
Likes
19
Downloads
67
Makes
0
Views
787
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

A set of small modular drawers that I use to store the many parts in the Totem Maker and Totem Robotics System. Note that there are very tight tolerances on how the drawers interlock! If you print in Prusament PLA on a Prusa Mini, then you should get a good result. Otherwise, you should start by printing the “TestSlotsSLICED” object and adjust your printer setting until you get a good fit. 

I came to design this because I needed some storage for the many parts in the Totem Maker and Totem Robotics Kit. Totem Maker is a a set of ABS beams, plates, nuts, bolts and brackets that allows you to build almost anything you can imagine (www.totemmaker.net). The Totem Robotics Kit is a set of 7 remote controlled robots that you build based on Totem Maker components. There are about 40 different nuts, bolts, brackets and 3D printed components that all have to be stored somewhere. I originally used bead boxes, but found these too difficult to open. The sliding drawers offered by this system are much easier on the fingers.

Tags