IKEA Markus chair arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are smaller arms for the Markus chair to enable it to fit easily under a desk, the final height is 160mm from…
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 117
- Makes
- 0
- Views
- 2,153
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
These are smaller arms for the Markus chair to enable it to fit easily under a desk, the final height is 160mm from the bolt centreline. The design is loosely based on Hichi's but reduced to fit on a standard printer with a 250 mm x 200 mm bed. I have embedded the bolts fully in the rim to get better stiffness. The design is symmetrical and attaches using the standard bolts.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
No
Supports:
Yes
0.35 mm
Infill:
80% around bolt holes
Filament:
Any PLA
Notes:
This needs to be pretty strong particularly around the bolt holes. This was printed with 5 perimeters at .35 layer height and 20% fill but i used the modification volume in PrusaSlicer to put 80% fill around the bolt holes. This worked fine and the arms feel as rigid as the steel ones.
Category: Office