1 / 8
Plaground3d's FlexiFidget Dragon Remix - with Magnet option
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified Plaground3d's DragonV2 by adding slots for 6mm diam magnets
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 101
- Makes
- 0
- Views
- 1,322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Plaground3d's Flex Dragon design is well done, easy to print from any material, looks neat, flexes just as expected, and seems robust.
Two modified versions,
- one where a 6mm diam magnet is put in place after printing, to be held in place with superglue
- A version where printing is paused at 3.6mm, and the 6mm magnets are put in place mid print. With this version the magnets are not visible after printing, but the magnetic force is slightly less.
- 6X2mm or 6X3mm magnets should work, I'd lean towards 6X3 for internal magnets, but 6X2 magnets worked well enough for me.
If you choose to download this version, please consider downloading the original also.
The file with the interior magnet slot is a .3mf file. I have tested the file successfully on Prusa Slicer and Bambu slicer.
I used these magnets from Amazon. To print these, I used PLA, 0.2mm layer height, 15% infill.