Mochi mini-ITX case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a compact and minimalistic mini-ITX PC case, aimed to low-profile motherboards.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 207
- Makes
- 0
- Views
- 4,356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Disclaimer
This project is presented AS IS.
I'm not responsible for any damage possibly occuring to your hardware.
I'm not a professional, just a dude on the Internet willing to share.
The Name
Why "mochi", you say? I like to name my hardware after japanese dishes :).
The Case
This is a compact and minimalistic mini-ITX PC case, aimed to low-profile motherboards.
You can customize the panel colors as you wish, to make it unique.
The source STEP file is included if you want to remix it.
Build Notes
You'll need:
- a mini-itx motherboard, with CPU, RAM, Cooler and NVMe storage
- a Pico PSU (the 90W one for my hardware, but YMMV)
- a 12V/2.5A power adapter
- an ATX power button (12mm wide)
- 10 M3 screws & nuts (8mm recommended, to avoid overlaps with the motherboard)
some fine mesh (metal or fabric) for dust filtering on the ventilation holes.
Due to the small clearance in the rear-lower-right corner (near the I/O shield), you may need a bit of glue to keep the panels aligned.
Testing
During my tests, the system at full load ([email protected] CPU, 16Gb RAM) reached a peak temperature of 55°C, with the Noctua fan barely audible. Again, YMMV.
Have fun !
Print Settings
Printer
TsrcT - Hypercube Evolution derivative
Rafts
No
Supports
No
Resolution
0.2mm
Infill
25%
Filament
PETG
Notes
Printed in PETG due to internal case temperature.
Flat, wide panels that needs no supports.
Beware of possible warping.