Adjustable Hexagonal phone stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a phone stand that I think looks cool :) ( LOOK AT THE DESCRIPTION!!!! )
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 40
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I made this and thought that it looked cool, to make this you will need two m3*30mm bolts and two m3 nuts Along with the two STL files there is a STEP file incase anyone needs helo and an instruction manual wich you can download. I can adjust the angle so it should work for anyone else.
If your printer doesn't have the best tolerances, don't worry, I have included 0.5mm on each side of the upper part but, i would also print the two parts slightly bigger to leave room for the screw to go through the screw hole!
here is the instruction manuale incase anyone couldn't find it:
