Adjustable Hexagonal phone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a phone stand that I think looks cool :) ( LOOK AT THE DESCRIPTION!!!! )
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this and thought that it looked cool, to make this you will need two m3*30mm bolts and two m3 nuts Along with the two STL files there is a STEP file incase anyone needs helo and an instruction manual wich you can download. I can adjust the angle so it should work for anyone else.
If your printer doesn't have the best tolerances, don't worry, I have included 0.5mm on each side of the upper part but, i would also print the two parts slightly bigger to leave room for the screw to go through the screw hole!
here is the instruction manuale incase anyone couldn't find it:
