1 / 3
Hanging lampshade ideal for IKEA HAVSRIS — image 1
1 / 3

Hanging lampshade ideal for IKEA HAVSRIS

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

PETG suspended/ pedant lampshade, perfect fit for the IKEA HAVSRIS cord set with switch

Rating
5 / 5
Likes
56
Downloads
350
Makes
2
Views
2,178
Reviews
2

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

Hanging lampshade ideal for IKEA HAVSRIS. I wanted to have a similar look of other lampshades, but more discreet as a secondary light, useful when reading. I'm sharing the design with you in case it can fit well your home decor. I strongly suggest to use Fuzzy skin because it will look more like a finish product and hide the layer lines.  

 

Additional materials

  • IKEA HAVSRIS cord set with switch (or any standard cord set) 

 

Installation

  1. Install HAVSRIS
  2. Unscrew the holder
  3. Insert the printed lampshade
  4. Screw the holder
  5. Screw light
     

Print instructions

  • Material: PETG (avoid PLA for poor heat resistance) 
  • Wall: minimum 3
  • Infill: 10% (but not really needed since the wall are small)
  • Fuzzy Skin (optional):  Contour only, distance and thickness of 0.05mm 
  • Supports: No, print the lampshade upside down (PETG stick very well to the bed)

Tags