Primitive FingerBoard Tool Enhancer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple PLA print to combine with a generic fingerboard tool, both common variants.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 52
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
Turns the horrible finger destroying socket wrench on generic fingerboard tools into a usable semi-ergonomic tool. comes together easily with a LOW TEMPERATURE glue gun. made with tinkerCAD.
Print Settings:
0.2mm layer height
4 wall lines
15 top/bottom layers
15% gyroid infill
brim on
no supports
(if this turns out breaking, I will turn up the wall lines and infill density and would recommend doing the same)
Assembly Instructions:
print the part in the provided upright orientation
use a LOW TEMPERATURE glue gun to fill the hole in the top of the part with hot glue
working quickly, shove your generic fingerboard tool into the hole, with the screwdriver side sticking into the smaller hole within.
if the tool gets stuck on the opening, twist it around until it fits and keep pushing it in.