Elegoo Neptune 3 Max Y-axis TBStron3d linear rail guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use these to align Y-axis linear rails on the Elegoo Neptune 3 Max
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 96
- Makes
- 0
- Views
- 1,609
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The TBStron3d Y-axis linear rails can be a challenge to align. This guide can be used to keep the Y-axis rails parallel to each other while installing the kit.
Print 2 of these in PLA. I don't know if these guides will work on the other Neptune printers. I will add the other Neptune printers if someone provides measurements.
Another Tip to save frustration. If you install the Z rails make sure the X-axis is square to the upper frame before tightening the X to Z rail bolts. I did this by simply measuring from the X-axis to the top frame on the far Left and far Right. If the numbers are different adjust one of the Z screws by hand until the numbers are equal. Then tighten the bolts.