Elegoo Neptune 3 Max Y-axis TBStron3d linear rail guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use these to align Y-axis linear rails on the Elegoo Neptune 3 Max
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 1609
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The TBStron3d Y-axis linear rails can be a challenge to align. This guide can be used to keep the Y-axis rails parallel to each other while installing the kit.
Print 2 of these in PLA. I don't know if these guides will work on the other Neptune printers. I will add the other Neptune printers if someone provides measurements.
Another Tip to save frustration. If you install the Z rails make sure the X-axis is square to the upper frame before tightening the X to Z rail bolts. I did this by simply measuring from the X-axis to the top frame on the far Left and far Right. If the numbers are different adjust one of the Z screws by hand until the numbers are equal. Then tighten the bolts.