Hager Network holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Network holder for Hager electrical fuse box. Holds 2 switches, one pihole and one router (could be 3rd switch).
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 45
- Makes
- 0
- Views
- 799
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to organize 2 switches, 1 router and 1 pihole in a very small space. Before adding the last switch it was all hanging unstable on standard Hager clamps. But there was no space for the 2nd switch, I created this holder to "stack" the equipment horizontal so it would fit all. I even included a cable canal in the back (L-shaped) so that the cable do not have to block the view.
Use 3.9mm by 13mm (minimal) self-tapping screws to secure the holder. 6 screws is enough, but you can go for all and you will need then at least 14 (including one for each middle section).