1 / 4
proxxon minitool saw guide and screw cutting jiig — image 1
1 / 4

proxxon minitool saw guide and screw cutting jiig

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tool to guide a proxxon minitool for cuts, and additionaly a jiig to hold a screw to be cut to length

Rating
0 / 5
Likes
6
Downloads
45
Makes
0
Views
740
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

With the additional clamp you can hold a screw in place to cut it, the long set screw can be used if you need to cut several to the same length, minimal screw length is around 12mm.

I added a thin sheet metal in order to protect the PLA from the cutting heat.

The two mount screws are for M3 the clamp and set screw should be M5, enjoy

Model was created in Onshape:
https://cad.onshape.com/documents/26075e9fa18d1916a5719a13/w/86611001220cc4f2fff9b109/e/02dfdd4637a87b4879ae6811?renderMode=0&uiState=660bbdda962ad809f5583d2d

Tags