Ronstan Plug to Schrader Valve Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to do a pressure test to see what could be leaking on a sunfish we picked up so I designed a ronstan drain…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 51
- Makes
- 0
- Views
- 357
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to do a pressure test to see what could be leaking on a sunfish we picked up so I designed a ronstan drain plug to schrader valve adapter. Hooked up my air pump and it worked great.
When it comes to pressure, less is better, you only need less than 1 pound of pressure. Don't blow your boat up.
You can use your ronstan plug washer, or print the included washer file in TPU.
Print Settings
Rafts:
No
Supports:
No
Notes:
I used .2mm layer heghts, place the ronstan end down on the printer bed, then I did variable layer height settings to print the schrader valve portion at .1mm.
Category: Other