Ronstan Plug to Schrader Valve Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to do a pressure test to see what could be leaking on a sunfish we picked up so I designed a ronstan drain…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to do a pressure test to see what could be leaking on a sunfish we picked up so I designed a ronstan drain plug to schrader valve adapter. Hooked up my air pump and it worked great.
When it comes to pressure, less is better, you only need less than 1 pound of pressure. Don't blow your boat up.
You can use your ronstan plug washer, or print the included washer file in TPU.
Print Settings
Rafts:
No
Supports:
No
Notes:
I used .2mm layer heghts, place the ronstan end down on the printer bed, then I did variable layer height settings to print the schrader valve portion at .1mm.
Category: Other