1 / 2
X-Max3 fang style fan shroud with nozzle cam — image 1
1 / 2

X-Max3 fang style fan shroud with nozzle cam

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Here's the mod everyone's been waiting for. Behold the nozzle cam for Qidi X-Max 3

Rating
0 / 5
Likes
5
Downloads
35
Makes
0
Views
552
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

Why bending yourself to observe the first layer lines?? Now you can just set, print and observe it in the comfort of your chair/bed…

Preparation

  • To get the nozzle cam working on your xmax3, if you already have a camera, you'd need to install Crowsnest Legacy v3. Instruction is here
  • The camera cable is only 1m long. So you either run a USB extension cable, or use an USB hub to bring it as close to the top as possible.

BOM:

  • Nozzle cam – In here, I'm using the 5MP AF nozzle cam from AliExpress (link) but you can get the 12MP one as well. Distance is optimized so maybe fix focus camera would work too. Or you can get any other nozzle cam style as long as the size of the camera is 8.6mm x 8.6mm then you should be good.
  • 4x M2 x 4mm 3.2OD heated inserts
  • 2x M2 x 6mm Socket Cap screws

Printing:

  • Paint-on support with 90º overhang angle to have the best print result
  • Layer height: 0.2mm minimum – I'm printing at 0.3mm layer height
  • Infill: 50-70%
  • Material: ABS, ASA, PACF

Post-Processing:

  • Remove all support materials
  • Install heated inserts in the following location on the fan shroud. If you don't have the newly designed front cover, don't put inserts to the side tabs. You only need the 2x on the front

NOTE: Because of a much higher CFM from the 5015, you HAVE to adjust the cooling fan to 40% or else you'll have layer adhesion issue for PLA

If you think the model is useful, please feel free to donate to support future development work

Tags