1 / 7
Small Winch optimized for printing — image 1
1 / 7

Small Winch optimized for printing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a small design challenge I made for my kids.

Rating
0 / 5
Likes
22
Downloads
161
Makes
0
Views
1,278
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

My kids have been obsessed with towing things and keep breaking the winches on their toy cards. I wanted to challenge my design skills and make something for them. It turned out to be quite a challenge to make it work the way I wanted, but I'm happy with the result. No locking mechanism, just a wind.

Just a warning: it's a bit challenging to put together, but once it's together it's very strong.

NEEDED: 3x M4x20mm screws (16mm work just fine too).

PRINT: one of each file as oriented for best results. Printed with standard .4mm nozzle and .2mm layer height.

ASSEMBLY: Look at the diagrams closely to see how the parts fit together. Some pieces use a sacrificial layer which means there is a single overhang layer that prints in the air and the rest of the piece uses it as a base. When assembling you can clear out that layer to make it easier to insert the screws. The models might look a little odd in the slicer but it will all work in the end.

First, use one screw to attach the handle to the arm. Don't attach too tightly, works best when there is some play and the handle moves freely when you crank. 

Next, you must assemble all the remaining pieces before screwing them together. Make sure the flared notches fit in the square axis and the spool pieces fit on the square axis. Screw in one side, then the other. 

Tie your string to the loop and have fun winding!

Tags