Drybox bar with mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of elements for mounting a filament spool inside a drybox,
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 53
- Makes
- 0
- Views
- 1,249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A set of elements for mounting a filament spool inside a drybox, Designed for Rotho Loft 3.2l box, but you can easily resize the bar to fit other types of similar boxes. The 3.2l box should fit most small spools (250-300g).
Put some silica gel on the bottom of the box to keep the filament dry during printing. It is especially important for TPU, ABS/ASA and nylon.
Print settings
Print the elements in the provided position. The mount needs to be printed twice.
Post-printing
Use four 4mm flathead screws to secure the mounts on each side of the box - they should screw directly into the holes in the plastic mounts. Use a standard bowden connector to guide the filament out of the box.
Category: 3D Printer Accessories