Drybox bar with mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of elements for mounting a filament spool inside a drybox,
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A set of elements for mounting a filament spool inside a drybox, Designed for Rotho Loft 3.2l box, but you can easily resize the bar to fit other types of similar boxes. The 3.2l box should fit most small spools (250-300g).
Put some silica gel on the bottom of the box to keep the filament dry during printing. It is especially important for TPU, ABS/ASA and nylon.
Print settings
Print the elements in the provided position. The mount needs to be printed twice.
Post-printing
Use four 4mm flathead screws to secure the mounts on each side of the box - they should screw directly into the holes in the plastic mounts. Use a standard bowden connector to guide the filament out of the box.
Category: 3D Printer Accessories