1 / 3
15degree screw on roof shim — image 1
1 / 3

15degree screw on roof shim

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

15 degree angle shims for roofing.

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
154
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

I did not want to cut the beams my roof should rest on at a 15degree angle and did not want to bend the metal angles (90 degrees) from the home depot.

Solution: 15 degree (the minimum any roof should have for letting the rain run down) shims with screw holes!

 

I also made them for the round bits that go under the wavy plastic roofs (in slim and with a 2mm height boost, as the fence I screwed it on was not level). Works well and looks better this way.

 

Print without supports on bottom (not on the side). I printed them with 0.3mm layer height and 0.6 nozzle in PLA with 4 perimeters (to support the pressure in the centre when screwing).

Tags