Parametric linear bearing housing SCxxUU in openSCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an openSCAD derivative of a bearing housing (in Fusion360 format) I posted earlier:…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 109
- Makes
- 0
- Views
- 416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an openSCAD derivative of a bearing housing (in Fusion360 format) I posted earlier: https://www.thingiverse.com/thing:2464917. This design allows me to quicker develop alternatives for the linear bearings that I print myself with POM. This is a snap in concept. The inner rings in the bearing housing contains the linear bearing in place.
Please look into thing https://www.thingiverse.com/thing:2476782 if you are interested in a parametric design of both RJMP-01-xx and RJ4JP-01-xx Igus style bearings.
Update 20-Sept-2017:
Version 4 now includes the SC6UU bearing block table values and added the corresponding long bearing dimensions for the L type bearings like the SC8LUU
Custom Section
Non standard options
// Additional paramters
EL = 0; // Additional length can be used to create longer/custom variants
centerHoles = false; // Insert holes in the center of the housing; an optional boolean to insert 4 fastener holes in the center of the housing as if it has a single 4 screw attachment in the middle instead of 4 attachment holes at the outside of the block (for long housings that is)
B1 = 17.5 + EL; // Distance between outer ring flanges where the linear bearing snaps in, this depends on your linear bearing design
s = 1.1; // Snap ring width
sd = 0.3; // Snap ring thickness, if too large it is difficult to get the bearing in, use 0.25 to 0.35
Category: 3D Printer Parts