Pi camera servo arm Raspberry Pi
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
made for the Modular Snap Together Raspberry Pi Case
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 79
- Makes
- 0
- Views
- 974
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Important: Some of the files you have to find on the remixed model
Notice: module made for the raspberry pi case with a arm mount and with a cable hole. you will need the models from @Sneaks “MODEL LINK” you can use any mounting type.
Credit for all the models used in the render:
- Raspberry pi model used alexandre_willame “MODEL LINK”
- the models for the arm joints used are all from @Erer “MODEL LINK”
- Servo reference model used is from: @demetrius_393003 “MODEL LINK”
- Servo Arm/Horn used is from: @Cohenco “MODEL LINK”
I use:
a Modular Snap Together Raspberry Pi @Sneaks with a Ender 3 V2 Mounts rail @ryanba, with the model 1 Arm rail mount for a aluminum extrusion. and I use a raspberry pi with octoprint. And for the servos I use the Micro servo 3.9g. with the Easy servos plugin on octoprint.
IMPORTANT for octoprint
You can use a octoprint plugin to control the servos. the plugin called easy servos made by mledan, iFrostizz and jneilliii.
In the image below, you can see the controls and my settings.
how to set-up is described on the Plugin Repo “LINK”