2-Prong Fencing Body Cord
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This contains both sides and a clip for an American style 2-prong body cord.
- Rating
- 4 / 5
- Likes
- 2
- Downloads
- 81
- Makes
- 1
- Views
- 617
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Share Alike
This contains both sides and a clip for an American style 2-prong body cord. Prong holes are enlarged to prevent minor print defects from affecting assembly. The holes are threaded and accept M3x10 and one M3x16 screws. The 16mm screw is for the clip. If you don't intend to use the included clip, then use two 10mm screws instead. I suggest using a standard nut on the smaller screw and a lock nut on the longer screw.
If anyone has any feedback, I'm all ears.
The demonstrated prints are out of date and don't reflect the current version of the model. They're only there to show a rough idea of what it is.
Print instructions
3-5 walls/perimeters/shells
20-50% infill
I suggest using supports to improve the finish quality of the screw holes, but it isn't required. Supports, however, are required on the clip.