OmniaDrop V3 extruder main body for IDEX printer Sovol SV04
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basically a re-design of the Omniadrop main body to be correctly mounted on the Sovol SV04 IDEX printer
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Hello there :)
I needed a cheap solution for an IDEX printer to do multimaterial (ultra soft TPE with PETG for example) for a Phd project at my uni (Polytechnique Montréal), so if that's helpful for someone else.
It's just a re-design for the omniadrop main body to fit on the SV04 instead of the right extruder and to permit a good setup of the XYZ offsets.
You will need to ajust the PID and the gear ratio with pronterface (I will add the values if I have some time)
I advise you to print it with SLA or to have 1.8 mm drill available if you choose to print it ine ABS/PETG with FDM.
Evrything is working well (I used the original Titan hotend of the SV04). Also if you need some good 60A TPU, for european Filaflex is nice, for american CoexFlex is damn good.
If there is some interset, i'll try to flesh out the page with pictures and stuffs.