Counting matching models…
Cable Chain für den Sovol SV04. Folgende Teile werden benötig: 1x Bed_Connector 1x Frame_Connector 29x Cable_Chain_Link 29x Cable_Chain_Link_Cover Original Heatbed Abdeckung abnehmen siehe Bilder. Ebenso den Kabelbinder entfernen. Den…
The bracket moves the filament run out sensor, down 20mm, forward 20mm, and tilts it towards the filament roll. This reducing the friction the filament runout sensor adds because the original orientation has the filament enter at too much…
a useful print to organize the extruder cables for the Sovol SV04 IDEX printer. Also useful to make use of the “mirror feature” because you will need a mirrored part for the second extruder. You will also need a M4 screw and nut and a M5…
Tool holder for the SV04. Modified the mount to fit the SV04 because how close the bed is to the screen. Adjusted the wrench slots. Sliced using Cura. Load the Tool holder and the Letters. Assign an extruder to each, highlight both, right…
REMIX from: https://www.thingiverse.com/thing:5191744 Great Design! This upgrade will allow the use of 5015 Blower fans on your SV04. These fans & ducts may cause worry for those that like loud fans. Db meter showed a -6Db over stock (+/-…
SV01 Pro print head is pretty unique and proprietary but can be upgraded to all metal heatbreak, volcano hotend and dual 5015 fan. Will not work on base SV01, this is only for Pro version. A. All metal heatbreak This step can be safely…
Wartungsständer Sovol SV04 um an der Unterseite des Druckers zu arbeiten. Es wird 1x die kurze und 2x die lange Stütze benötigt.
My first draft which is now undergoing a test phase. For me, the original sensors included holder did not work at all. The original sensors are used. The holder can be simply clipped on. Furthermore, a piece of PTFE tubing should be used…
The silicone wipe blocks that come with the Sovol SV04 do a pretty darn poor job of stopping bits of purge filament from getting on prints since they sometimes will get stuck to the side of the nozzle and get dragged past. Adding a wire…
Poor cable management can lead to print issues quickly so fix it with these. Easy to print and you can just zip tie on!
I am currently using Cura 5.0.0 as slicer. Unfortunately Cura does not show any logo for the Sovol SV04 on the respective buildplate. Therefore, I have created five logos: SV04_Dual_Mode SV04_Copy_Mode SV04_Mirror_Mode SV04_Single_Mode_01…
Print Flat on Bed (See Pic) Uses only 1 of existing M4 screws NOTE: IMHO you only need 1 screw per filament sensor (add nut for back) and leave it a hair loose to allow for movement. This allows the sensor to adjust angles as your spool…
Upgraded fan bracket for Sovol SV04 and SV01 Pro using the EBMPapst RLF35-8/14N. Highly recommend printing in at least ABS/ASA.
Tool Trays for the SV04! NEW! - Angled Opening for easier access from the front L Tray = Holds 4 SD Cards. Has a lip to protect SD Cards from contact when pulling out tray R Tray = Has a lip to stop it from fulling coming out R Tray -…
I got tired of digging my fingers around in the stock bins or removing them and having to adjust them each time to make sure the wipe block was in the right place, so I made these quick easy inserts that can be pulled out easily for quick…
This is a basic shim/packer in 1, 3 and 5mm thicknesses that can be used to correct for z axis extrusions that aren't parallel on the Sovol SV04. For reference my z axis extrusions were 4mm closer together at the bottom than at the top.…
Sovol SV04 mount for Creality Sprite Extruder
You don need additional mounting hardware, the screws provided with new extruder are enough but you will need to shorten the ones for the front fan mount (or use shorter ones) With this you gain a little more bed space(309mm in x, 308mm…
Right part cooling fan duct on my Sovol SV04 broke while and I could not find any modeled replacement on internet so i decided to model my own. Model in the pictures is printed with resin printer
Simple Sovol Sv04 Etruders cable brackets :) Can be used without additional fasteners
Sovol SV04 Kabelhalter für Flachbandkabel der Druckköpfe. Die Kabel liegen dann nicht mehr so breit auf dem Tisch.
Bed alignment tabs for the Sovol SV04.
Hallo, habe diesen Extruder verbaut, original zieht nicht gut ein und wiegt etwas über 500 gr. Dieser wiegt nur knapp 300 gr. Einzug ist viel besser gemacht bei diesem Druckkopf. Gedruckt habe ich mit 40% Füllung, Material ist PETG. Zwei…
Allows the hero me gen 7 toolhead to be used on the sv04 idex printer. I have installed this system with a BMG using the oroginal sv04 stepper and blower on T0. I have not installed it on T1 yet so if you try it and have any problems…
I loved the Kobra version of this. It's very simple, snaps right on and fits snugly, so I remixed it for my SV04 (or any other 20x20mm frame). Recommend print in PETG just to avoid snapping when putting on the frame, although it might…
O problema comum nas impressoras SV04 é a colisão do cabo da extrusora se ambas as extrusoras estiverem em uso. Há muitos designs para lidar com esse caso, mas eu queria uma maneira quase secreta, em que o ambiente da impressora parecesse…
Filament Spulenhalter für den Sovol SV04 (passt auch auf den SV06 und vermutlich auch auf weitere Modelle). Hier werden die Spulen mittig festgeschraubt und drehen sich somit gleichmäßig beim Druck. Ich Teile für Spulen bis ca. 75mm…
Needed to create a gantry adapter for my SV04 for a project to add my E3D Titan and Volcano hotend. Screw holes were a bit tight, but able to make it work. Only downfall of this model is that Sovol only included two screw holes on the…
Filament-Rolle für den SV04. Zusätzlich zu den Druckteilen werden zwei Kugellager 608, eine Zylinderschrauben mit Innensechskant ISO 4762 / DIN 912 - M8 x 65 oder 70 und eine Mutter M8 benötigt. Das Vorderteil wird aufgeschraubt und…
support de cable du plateau chauffant sv04
Here are various parts that I modeled and printed when building my budget enclosure out of 1x2 pine boards and plastic sheeting. Not sure how it is in other countries but for reference 1x2 boards in the US are ¾ inch by 1.5 inch. There is…
Hello there :) I needed a cheap solution for an IDEX printer to do multimaterial (ultra soft TPE with PETG for example) for a Phd project at my uni (Polytechnique Montréal), so if that's helpful for someone else. It's just a re-design for…
Dual 5015 fan duct for sv04 printer with volcano hotend. Really increases the cooling performance with out sacrificing on the idex extruder clearance/ copy & mirror print area. Should clear the volcano heat block, but you might want to…
this is a Filament sensor mount for Sovol SV04, it uses the hardware from the original sensor, so no new hardware is needed it moves the sensor so that the extruder has an easier time pulling on the filament Please note that the new print…
Mounting brackets to convert the toolheads of the SV04 to the Dragon Burner toolhead. Mounting brackets should be used with Sherpa Micro extruders. Mounts use stock M4 bolts used on mounting for original extruder. Firmware will need to be…
Pied de 60mm réaliser pour SOVOL SV04 pour la surélever , peut être adapté a tous les profilés 2040 d'imprimante, graveuse laser,… A imprimée les rainures vers le bas avec des supports
The stock baskets ran straight into the Y axis linear rails mount I'm working on, so I had to make something flatter. I also realized that the stock baskets are annoying to empty so I'd rather have a solution where the waste can…
i wanted to have a simpler mount for my Thin Client.
Cam mount for the Sovol SV04 Y Rail to mount a TPLink C100 IP camera. Mounting is done with a M4 bolt and T nut.
CR-Touch bracket for the Sovol SV04. I recommend printing using a resin printer but could also be printed with 0.1mm layer height. Nozzle to probe offset: X=-1.2 Y=25 Z=-3.15 Additional hardware: - 4x M3x6mm Countersunk - 2x M3 Nuts
Die Filamentführung ist verbessert für den Sovol SV04. Rillenrolle ist eine 11x4x4mm Rolle. Die für den Rollenhalter ist ein Kugellager mit 22x7x8mm. Die Befestigungsschraube für die Rollenhalterung ist jetzt eine längere 4x16mm…
About This is still a work in progress so any feedback and/or remixes that improve it will be highly appreciated. It should fit similar machines with little to no modification, as long as the base plate for the bed is the same and the Y…
Mount to attach a brass wire brush to the purge buckets of the Sovol SV04. Reuses the included screws. designed to hold half of the head of a brass wire brush. I cut the handle off of one from Harbor Freight with side cutters and then cut…
Beweglicher Filamentsensorhalter für Sovol SV04. Nachdem der originale Filamentsensorhalter scharfkantig war (Filament ist hängen geblieben) und das Filament teilweise stark geknickt wurde, habe ich diesen Halter entworfen. Bis jetzt…
Die Filamentführung ist verbessert für den Sovol SV04. Rillenrolle ist eine 11x4x4mm Rolle. Die für den Rollenhalter ist ein Kugellager mit 22x7x8mm. Die Befestigungsschraube für die Rollenhalterung ist jetzt eine längere 4x16mm…
The stock baskets ran straight into the Y axis linear rails mount I'm working on, so I had to make something flatter. I also realized that the stock baskets are annoying to empty so I'd rather have a solution where the waste can…
About This is still a work in progress so any feedback and/or remixes that improve it will be highly appreciated. It should fit similar machines with little to no modification, as long as the base plate for the bed is the same and the Y…
Filament Spulenhalter für den Sovol SV04 (passt auch auf den SV06 und vermutlich auch auf weitere Modelle). Hier werden die Spulen mittig festgeschraubt und drehen sich somit gleichmäßig beim Druck. Ich Teile für Spulen bis ca. 75mm…
Cable holder for the extruder cables of the Sovol SV04. The holders are clicked into the profile rail and the cable is secured with a cable tie. No screws are required. -- Kabelhalter für die Extruder-Kabel des Sovol SV04. Die Halter…
An adapter to add my obsolete Panda Touch as K-Touch to my Sovol SV04 that runs Klipper as Firmware. I printed in AB
The idler bearing stripped out of the lever on the left extruder on the Sovol SV04 we have at work. They wouldn't send me just the lever, so I made a rough model of the broken one in Onshape and printed it out of PLA-CF (using the right…
Sovol SV04 Mount for Creality Sprite Extruders (Standard and Pro) — for those who don’t want to use (or dont have) the breakout board (like me). Printed in ASA. The original extruder on my SV04 broke, and since replacement parts are no…
all parts can be printed without support. You will need two M3 screws and nuts to mount the Pi cam case to the holder and the holder to the arm. And you need two to four M2 screws to hold the cam module in the case. The holder can be…
I found that the standard cooling fan on sovol were not very effective so i design this upgrade. This model also allows for the duct to pivot out of the way to make nozzle swaps much easier. Hardware needed: 4x M3x20 bolt and nut 2x M5x20…
To give my Sovol SV04 more stability - especially in large Z-heights and because of the up to 2 kg filament on top of the frame - I constructed a reinforcement. As inspiration I used the project of 3Dmaich . The reinforcement consists of:…
A sliding tray for Sovol SV04. Multimaterial. Printed in CURA with 0.36 layer height with supports. Also a version without logo is provided. Sliced in CURA 5.2.1. Rotate 45 degrees and fiddle with it until fits. The bed is defined as…
SV-04 Modified back cover, allows insert/removal of SD card for firmware upgrades without disassembly.
I have been interested in creating uncomplicated cable supports for my SV04 printer that are easy to install, print and don't get in the way. They don't impose any restrictions on the maximum printing height. To make them, you'll require:…
Files are for the right side. Mirror for the left of course. These hole several times as much purge material so they don't have to be emptied near as often. Clean-out via doors on the sides so you can empty anytime. The brush holder is…
Printed in ASA CF You can use the original screws
I created a skirt / drawer combo to increase the looks of the SV04s front because it looked a bit too open in my oppinion. Its build in a way that no rolls are colliding with it and the USB and SD Card slot can still be reached without…
These are mounting brackets for mounting Micro Swiss NG extruders onto a Sovol SV04. Materials needed Left Extruder: five M3 heat inserts, three original M4 screws used to mount the original extruder, and two M3 25mm screws (use the ones…
Allows you to tweak minor adjustments to the right extruder's height. From the orginal: If you need to adjust it up or down a poofteenth of a millimeter then at least this will let you know how big a poofteenth you've moved it. Each…
My SV04 rear cable had nasty habbit of getting caught on the rear stepper motor when the bed was full extended, causing the bed to not fully extend! Although I printed chain link cable parts for my other printer, I found this quick and…
Quick Remix of the original model of @TylerDurden_312780 with holes for M5, to be mount with bolts and t-nuts. Printed mine in 0.2 with 3 perimeters and 20% gyroid infill, printed without support without problems. For the right bracket,…
These have the same internal geometry but have different screw hole positions for them to line up with the nozzle. This does not decrease your mirror or copy print space The right fan duct needs to have 2x spacers printed but the left…
A pair of strong tool trays that fit snug in-between the front of the frame on the Sovol SV04 IDEX 3D printer. My printables profile https://www.printables.com/@jammychap_1154546/ Print Settings Printer: Sovol SV04 Rafts: No Supports: No…
This part allows you to mount the SV04 filament sensor at an angle and a little better aligned with the filament roll and just snap it into place. Perhaps a little easier to use than the model I used for the remix, no need to remove the…
I needed to get rid of the stock extruders and have a lot of trust in the Sprite Extruders for TPE and TPU. Of all the existing brackets, OTHEDESIGN's was the best because it used the ribbon cable and existing breakout board on the…
A couple of mounts for the X and Y axis of the Sovol SV04. I am planning on leaving the X axis mount on all the time so I added a hole for a zip tie to hold the wires off to the side. The Y axis is only a temporary clamp mount. Here is a…
A complete set of mounting kit for Biqu H2 (H2S may also work) extruder on Sovol SV04. This kit allows you to use factory 4020 fan instead of 5015 fan. This printer is a nightmare, it never worked no matter how I tried. It always having…
Two options available to relocate the factory SV04 filament run-out sensors. My initial motivation was to move them downwards to provide better visibility to the filament dryer that I'm mounting behind there, however, after starting I…
Lüfterhalter um den lauten Mainboardlüfter des Sovol SV04 gegen einen leiseren 92x92x15 Lüfter zu tauschen. Der Halter wird mit den originalen Lüfterschrauben festgeschraubt. Im Halter (Stütze) kann ein Step-Down-Wandler untergebracht…
This fully printed model provides a mounting location for the Sovol SH01 filament dryer on top of the SV04. The base and horizontal truss are exposed to the heat of the dryer so should be printed in PETG, ABS, ASA or something with…
Here is a simple solution to some otherwise wasted space under the frame in the front of the machine. There are two different style bases and different style drawers. You can pick and choose, and print which combinations you want. All…
The default SV04 purge buckets are too small, and they aren't compatible with the brush holder addon unless you drill them. I decided to make this remix as I didn't need a bucket as large as the original version, but I wanted something…
I've found a few mounting brackets and shrouds for the MicroSwiss Left hand configurations, but none were a complete fit or offered L & R hand compatibility. Check out the MicroSwiss NG Direct Drive Extruder for details: MicroSwiss Store…
This is a mouth for the Sovol SV04 I designed it in dual color to make use of his IDEX feature A nice design choice which gives your printer a bit more personality Enjoy your printing
