1 / 6
Magnetic Dishwasher CLEAN/DIRTY Toggle Label
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of inspecting coffee mugs for residue to decide if the dishwasher has been through a cycle or not? Print and track
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 55
- Makes
- 0
- Views
- 517
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
UPDATE: Now with recesses for magnets in the slider for magnetic latching!
You will need:
- 4x 10x1.5mm disc magnets (OPTIONAL: +2 for the slider latch)
- Ideally, 3 colours of filament
My print settings:
- Infill: 15%
- Layer Height: 0.15mm
- Nozzle Diameter: 0.6mm
- Printer: Prusa mk4
Notes:
- I used a 0.2mm tolerance around the magnet recesses, but depending on your printer, you might need to change these if too tight/loose.
- Fusion 360 file is (partially) parametric if you have different magnets available
Construction:
- Insert the 4 magnets. I recommend using a whole stack of magnets to press-fit them in and then slide the whole stack off to the side. If necessary, glue but be warned! CA glue fumes will cloud your pretty print! A dab of liquid nails would do the trick.
- Insert DIRTY and CLEAN labels. These should press-fit in.
- UPDATE: Insert magnets into the slider part, making sure the polarity matches those earlier
- Snap the slider over the whole assembly
Opportunities:
- Additional magnets to latch the slide in place → UPDATE: New part included!
- Blank Blocks for customisation → UPDATE: New parts included!