Manfrotto 728B contact pads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement contact pads for Manfrotto 728B tripod
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a broken contact pad while replacing the clamp bodies on my Manfrotto 728B. I used Frubino's AWESOME replacement clamp bodies (Thingiverse 37672). I found that the smallest clamp body didn't clamp quite hard enough (I could still move it by hand with the stock pad).... so, here are 8 sizes of pads. The +0.25mm pad is what worked for me for my smallest clamp. The base clamp "should" be the same size as factory... but the + measurement is from datum, not a confirmed comparison to factory.
Recommend PETG and all perimeters (no infill). Suggest printing them upright... good luck that they all stay stuck to your bed!
Note: I marked these as a remix on Thingiverse so people printing Frubino's clamps would see them if they needed them. They are my original work.