Quick 861DW hot-air nozzle side-mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount 5, 10 or even 15 nozzles to the side of a Quick 861DW
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 2
- Views
- 400
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Nozzle holder for Quick 861DW hot-air station.
Allows to mount the holder with existing screws on the exterior of the station with an option to securely mount up to three pieces at once.
There is a place for double sided tape which I personally didn't use since it holds very well as it is. May be useful for the middle piece though.
To mount all three holders print the following parts:
2 x Hot air nozzle holder top and bottom.stl
1 x Hot air nozzle holder middle.stl
2 x Hot air nozzle holder rail.stl
The holders require some supports in place of the rail slots. I recommend using paint-on supports in the slicer, see a screenshot for reference. Don't put supports inside the screw holes.
Use 6 to 8mm M3 screws to connect holders to rails. I didn't put the screws into the bottom holder. Instead, I first attached the bottom part to the hot-air station, connected top and middle parts to the rails, then slid the assembly into the bottom part and attached it to the station.