Quick 861DW hot-air nozzle side-mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount 5, 10 or even 15 nozzles to the side of a Quick 861DW
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 2
- Wyświetlenia
- 400
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Nozzle holder for Quick 861DW hot-air station.
Allows to mount the holder with existing screws on the exterior of the station with an option to securely mount up to three pieces at once.
There is a place for double sided tape which I personally didn't use since it holds very well as it is. May be useful for the middle piece though.
To mount all three holders print the following parts:
2 x Hot air nozzle holder top and bottom.stl
1 x Hot air nozzle holder middle.stl
2 x Hot air nozzle holder rail.stl
The holders require some supports in place of the rail slots. I recommend using paint-on supports in the slicer, see a screenshot for reference. Don't put supports inside the screw holes.
Use 6 to 8mm M3 screws to connect holders to rails. I didn't put the screws into the bottom holder. Instead, I first attached the bottom part to the hot-air station, connected top and middle parts to the rails, then slid the assembly into the bottom part and attached it to the station.