Pellet Smoke Tube Funnel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel to quickly fill pellet smoke tubes to add smoke flavor while cooking.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 118
- Makes
- 1
- Views
- 560
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
Like many who bought a pellet smoker, I wanted to add additional smoke flavor and discovered smoke tubes, unfortunately, filling them was a hassle due to the small opening. I designed a funnel that fits in and around the top of the tube to quickly fill the tubes.
I use these smoke tubes from Amazon, but the hexagonal design seems to be common across multiple manufacturers.
https://www.amazon.com/Lovefish-Pellet-Stainless-Brushes-Smoking/dp/B08JGKK2C7
No supports required, print with the top of the funnel on the print bed. I used Overture PETG with generic PETG settings on my Prusa XL. Recommend a large layer height to save time, I used 0.30mm Draft settings with a 0.40mm nozzle, but a 0.60mm or larger should be fine.