49 models
I own a Traeger Pro 575 Smoker. I've had ongoing issues with mice sneaking into the smoker at night and making a mess. I suspect many other people have the same issue but haven't realized it yet. Key signs are small black pellets on the…
Customize your new Traeger pellet grill and griddle These are printable accessories for the new Pop-and-Lock (P.A.L.) system on the most recent Timberline, Ironwood, and Flatrock grills from Traeger. They clip on just like the original…
I hate when wires get all tangled and kinked, and the stainless steel braided thermometers are especially bad. This model is for Trager style 3.5mm jack thermometer probes that have a silicone sock around the top of the probe. Holds the…
This is a simple print that uses 6-8 10mmx2mm disk magnets inserted into the recesses in the back. It allows you to store the meat thermometer on the grill when not in use. It also allows you to coil in the slack from the cord while in…
A chute that fits over a Traeger Ironwood 650 pellet door. Like so many Traeger owners, I quickly got tired of watching pellets fly everywehere when emptying the bin. I've seen a few different chute ideas. The one I liked the best (…
This is my version of a Power Cord Holder for my Traeger 575 Grill . (I think i could be used on other models) You can wrap the cord around it and then plug in the end to keep it neat and tidy. I also added a space on the backside to add…
EinDisplayträger und Abdeckrahmen für 1,3" OLED Module z.B. Arduino. Print Settings Printer Brand: Anycubic Printer: Photon Resolution: 0,2 mm Infill: 25% Filament: Anycubic PLA white Category: 3D Printing Tests
UPDATE (01/11/2022): I have added a curve to the bottom of the chute to better concentrate the pour from the hopper. In testing it has proven to be a noticeable improvement over the original. UPDATE (11/08/2021): I have added a new…
Im Schrank, wofür ich schon etwas für die Rückwand gemacht habe (siehe Link: https://makerworld.com/en/models/138898), fehlten leider die Pins Träger für die Einlegeböden. Aber dieses Mal waren ∅6mm Bohrungen. Ich habe die Halter 1 mm…
It will use the M4 clip from https://www.printables.com/model/438045-traeger-pal-pal-pop-and-lock-accessories/files (P.A.L. - M4 Clip (single).stl) You just need an M4 8mm screw and 2 nuts. I used OrcaSlicer and just added one support to…
Instructions (please read!): Unfortunately, I did not create the STL model in proper orientation. Therefore you have to adjust orientation in your slicer before slicing it. The face with the 5 holes should be directly placed on the…
Gotta love it when a plan comes together. Printed in polymaker ASA, .6 nozzle as that is what I was using at the time. Holds up well, bends and adapts to the bottle without issue. Using a 16oz spray bottle.
Cover to keep the rain out of the grease trap bucket. on a traeger pellet grill. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .3mm Infill: 100 Filament: generic Polycarbonate Carbon fiber fill…
I remixed this clip to add a paper towel holder that holds the paper towels vertically in the air.
A simple model that sits over something that's 2mm thick and gives a nice solid hook for your grill accessories or in my case a power cord for the auger in a pellet grill.
A cap to cover the grease chute of your Traeger Pro smoker when not in use. This design uses bending tabs to hold itself on with friction, meaning your print tolerances don't have to be perfect for it to fit. That said, I'd recommend…
I got a pellet smoker, and to easily remember what kind of wood pellets I have in there, I designed these labels with holes at the bottom for magnets. Since this is designed to be put on the smoker itself, I would recommend a filament…
Disposable Traeger Grease Bucket Liner Printed with Spiral Vase Mode, 3 bottom layers Ran out of yogurt containers and don't want to pay for the expensive Traeger disposable grease bucket liners, so made this. Used only 27g of filament,…
A simple design that will hold a can, bottle, or your favorite seasonings on your Traeger smoke box Printed at 0.16 resolution w/ standard supports in PLA for my smoke box, but I would highly recommend more durable filament to ensure…
This is installed on the Traeger shelf so it doesn't chip the paint away on the legs as it rests against them. These press in to place. Secure with super glue. Print Settings Rafts: No Supports: No Filament: n/a TPU Category: Outdoor &…
A simple design that will hold a can, bottle, or your favorite seasonings on your Traeger smoke box This is my first uploaded and printed model - Printed at 0.16 resolution w/ tree supports in PLA for my smoke box, but I would highly…
Remix of the excellent thermometer holder by Tony Rueb. Model can be found here: https://www.printables.com/model/155862 This remix allows for use of six 15 x 2 mm magnets
Inspiriert durch die “DIY Dremel CNC” von Nikodem Bartnik https://www.thingiverse.com/thing:3004773 habe ich mir meine eigene DIY CNC konstruiert. Die Aufnahme von Fräsmotoren o.Ä. habe ich mir eine eigene Werkzeugaufnahme gestaltet. Auf…
Version 2 now with no supports! Now with no store bought hardware. A more robust design to avoid breaking the feet when storing the grill. Adjustable feet / legs for the Traeger Ranger tabletop pellet grill. This replaces the square…
A selection of Pellet labels for my Traeger. Use them to identify what pellets are in the hopper. You can add 6x2 magnets to hold them inside the hopper lid, or on the outside of the smoker.
Hopper Chute for your Traeger Grill (works on my 575 and may work on others with same size chute) The magnets are added at layer 34 of the print. Magnet size - 4.75mm X 19.05mm (.75" X .187")
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG
When smoking a long cook the pellets on the sides of the hopper stopped sliding and it caused the pellets to get stuck and the auger had no pellets to push and keep the heat at the set temp on my smoker. These were designed to sit at the…
Weil mein Traeger Ranger (https://www.traeger.com/de/de/pelletgrills/portable/ranger) ständig seine Gummifüße verliert, habe ich heute schnell neue gedruckt. Kein großes Thema, aber vielleicht für irgend jemand anderen eine schnelle Lösung.
replacement LRFs (Little Rubber Feet) for Traeger Ranger portable electric smoker. I took the thing on one trip and kept losing the included feet. Printed on PolyFlex TPU95, 8% infill, on a Prusa MK3S. Fully loosened the idler screw,…
Replacement lid latch for the Traeger StayDry pellet bin. Printed mine out of PETG as this will be out in the sun but PLA would also work. I'd suggest printing with a few more wall loops (4-5) just to make it as solid as possible. Printed…
These are leg holders for the Traeger Pro 575 Grill. They will help keep your pellet grill in place. Printed at 15% infill with no supports. 3 #8 deck screw holes to screw down to your deck.
Ich habe eine Halterung für das VTECH-Mikroskop unseres Kindes entworfen, in die die mitgelieferten Objektträger perfekt passen. So sind sie ordentlich verstaut und liegen nicht mehr lose im Kinderzimmer herum. Die Halterung sorgt für…
Da man die Standard Brompton Tüllen ohne Dreidornzange nicht mehr auf die Spanngummis bekommt, wenn man diese aus Gründen abgenommen hat, habe ich unkompliziert mit Tinkercad eine etwas größere und längere Version der Tülle gemacht. Die…
Description This is an adapter that can be used on Gen 1 Traeger Timberline BBQ's to allow you to replace the standard shelf with a folding shelf. This adapter may work with Ironwood and Timberline D2 models but I haven't tested it. The…
Real nice tight fit - kudos to the original creator
Earlier models of Traeger smoker grills had a recessed button to change the "p-setting" which regulates the interval time for the pellet auger in the "smoke" mode. The "p-setting" is supposed to be a way to tune the smoker so that it…
Was able to find a new Arc controller on buy/sell for cheap but did not come with the adaptor plate to convert the digital pro controller to the newer Arc controller, Built this adaptor and figured others may also need it. Just need some…
I was gifted a Traeger and one of the rubber feet had been lost so I modeled a replacement. I printed in PLA but no reason you couldn't print in TPU
better smaller width clips, work good for a grittle (traeger) printed in pla so it can flex a little DO NOT PRINT IN PET-G OR TPU.
Ersatzteil für Klemmtraeger. Klemmwinkel um Jalousetten am Fensterflügel zu befestigen. Einstellung: 0,15 Structur Inf.30 % Gyroid Perimeter 3
I remixed the labels that kuljaden created. I added a notch at the end to attach to a bucket handle.
This is a remix of the Traeger Pellet Bin Tags designed by Rico on Maker World . These plug directly into indentations that are part of the Traeger pellet bins. The 3mf includes 9 tags that are pre-labeled with Traeger's common pellet…
Convenient storage for extra Traeger pellet bin tag storage, for tags such as RockDr 's Editable Traeger Pellet Bin Tags , when not in use. Model printed using Prusament Galaxy Black.
Mark the bin of pellets that is loaded into a smoker with these active bin tags. These tags are designed to be securely lock into place over RockDr's Traeger Pellet Bin Tags . Models were printed with Prusament Galaxy Black and Protopasta…
Honeycomb Soda Can Holder for Traeger P.A.L. Rail Keep your drink within reach while grilling with this two-piece holder for a standard 12 oz soda can. I wanted an open design with thinner walls to use less material, while keeping a solid…
The vent covers on the Traeger Junior are large enough for mice and small rats to enter. If you keep it outside it's a good idea to cover them.
Slim Folding Thermometer Holder for Traeger P.A.L. Rail A two-piece holder that keeps a folding thermometer within reach while grilling, with a slimmer pocket, a separately printed rail clip, and recessed hardware. I made this after…
Meine Frau brauchte neue Regalbodenträger, weil die alten durch das hin und her beim Einteilen des Schrankes, kaputt gegangen sind. My wife needed new shelf supports because the old ones broke due to the back and forth when arranging the…
