1 / 1
Pellet ramp for traeger(tm) pro series smoker — image 1

Pellet ramp for traeger(tm) pro series smoker

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

In order to make removal of pellets from a Traeger Pellet Smoker simpler, I have created this ramp.

Rating
5 / 5
Likes
21
Downloads
139
Makes
4
Views
906
Reviews
5

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Instructions (please read!): 
Unfortunately, I did not create the STL model in proper orientation. Therefore you have to adjust orientation in your slicer before slicing it. The face with the 5 holes should be directly placed on the printbed.
When placed this way, you won't need to any supports to print the ramp.

Magnets:
After printing you can glue in up to 5 magnets in to the prepared holes (magnet diameter 12mm, height 2mm)

See picture how the ramp is attached to the smoker.

This was tested on a pro series 22 model, but might also fit on other Traeger smokers (e.g. D2 575 or 780 etc..), where the pellet outlet has a width of 110mm.

Tags