1 / 1
Traeger Timberline Gen 1 Shelf Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to allow you to install common, folding shelf brackets on your Gen 1 Traeger Timberline 850 or 1300.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Description
This is an adapter that can be used on Gen 1 Traeger Timberline BBQ's to allow you to replace the standard shelf with a folding shelf. This adapter may work with Ironwood and Timberline D2 models but I haven't tested it.
The folding shelf brackets (4.5x8" in my case) can be found on Amazon and I believe they are mostly common. Tested version: https://www.amazon.ca/dp/B0B3M88149
Print Settings
- Nozzle Size: 0.4mm
- Material: PETG, ASA, ABS
- Layer Height: 0.30mm
- Infill: 70%
- Supports: None
- Print upright on side to prevent overhang issues in the bottom hole
Assembly
- Remove the shelf from your BBQ but keep the 6 screws. You will need 2x ¼-20 bolts to fit the screws
- The adapter installs with TOP FACE facing towards you
- Insert a screw, from the rear side, in the bottom hole
- Depending on the side of the BBQ, which has different mounting points, insert a screw from the front in either the 2nd or 3rd hole, and mount it to the second hole on the BBQ
- Insert a screw through the top hole of the bracket, through the adapter, and secure to the BBQ
- Add bolt to bottom screw