1 / 1
Traeger Timberline Gen 1 Shelf Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to allow you to install common, folding shelf brackets on your Gen 1 Traeger Timberline 850 or 1300.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Description
This is an adapter that can be used on Gen 1 Traeger Timberline BBQ's to allow you to replace the standard shelf with a folding shelf. This adapter may work with Ironwood and Timberline D2 models but I haven't tested it.
The folding shelf brackets (4.5x8" in my case) can be found on Amazon and I believe they are mostly common. Tested version: https://www.amazon.ca/dp/B0B3M88149
Print Settings
- Nozzle Size: 0.4mm
- Material: PETG, ASA, ABS
- Layer Height: 0.30mm
- Infill: 70%
- Supports: None
- Print upright on side to prevent overhang issues in the bottom hole
Assembly
- Remove the shelf from your BBQ but keep the 6 screws. You will need 2x ¼-20 bolts to fit the screws
- The adapter installs with TOP FACE facing towards you
- Insert a screw, from the rear side, in the bottom hole
- Depending on the side of the BBQ, which has different mounting points, insert a screw from the front in either the 2nd or 3rd hole, and mount it to the second hole on the BBQ
- Insert a screw through the top hole of the bracket, through the adapter, and secure to the BBQ
- Add bolt to bottom screw