Ender 3 / 3 Pro with Linear Rails dual Z mechanical G34 stoppers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These blocks will stop the x axis gantry at a precise height to make the Marlin "Mechanical G34" work with linear rails
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 64
- Makes
- 2
- Views
- 1,854
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v2.0
These blocks will stop the x axis gantry at a precise height to make the Marlin "Mechanical G34" work with linear rails
You will need to activate Mechanical Gantry Calibration in Marlin, by uncommenting #define MECHANICAL_GANTRY_CALIBRATION in configuration_adv.h
This precise block is made for the following configuration:
#define GANTRY_CALIBRATION_EXTRA_HEIGHT 15
#define Z_MAX_POS 210 (configuration.h)
I know that this is reducing the available printing volume but I personally never printed such tall items that i don't feel the problem.
Also being that conservative avoid squishing the bowden tube.
Still, if you feel the need to have it smaller, contact me or i will eventually upload the fusion360 file.
Print 2, mount each one right above the Z linear rails, use a V-slot mount nut.
You better measure YOUR Z_MAX_POS height carefully before running it, use your head. I am not responsible if YOU damage your hardware/printer.