Samsung S24 Ultra Camera Caps
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.12 net (excluding VAT)
For file: S24 ULTRA CAMERA CAPS.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Made for extra protection of 3 main cameras.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 130
- Makes
- 1
- Views
- 2,489
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
💬 Summary
A set of protective lens caps designed for the Samsung Galaxy S24 Ultra. These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of security to your device.
📝 Description
This model provides extra protection for the protruding camera lenses of the Samsung S24 Ultra. The lenses are often the first point of contact when the phone is placed on a rough surface or put into a pocket with keys. These caps are designed to cover the lens rings perfectly. They are lightweight and low-profile.
Protection: Guards against scratches and scuffs.
Fit: Designed for the 3 main camera modules.
Compatibility: Can be used with many phone cases that have individual cutouts for the lenses (as shown in the photos).
🖨 Print Settings
For the best fit and finish, high precision settings are recommended.
Material: PLA (Hard protection) or TPU (If you prefer a softer, rubber-like fit).
Layer Height: 0.10 mm (Use a fine layer height for the best fit and smooth surface).
Nozzle Size: 0.4 mm
Wall Loops: 2
Infill Percentage: 100% (The parts are thin enough that they will be solid anyway).
Supports: No.
Brim: No.
💡 Usage Steps:
Ensure your printer is calibrated for accurate dimensions (flow rate).
Print the caps (takes only a few minutes).
Gently press the caps onto the camera lenses. They rely on a friction fit.
Note: If the fit is too tight, scale the model to 101% in your slicer. If too loose, try 99%.