Bucket Mill Mouse Trap (Print in place)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mill-style mouse trap prints in place and clips on the rim of a standard 5-gallon bucket.
- Rating
- 4.667 / 5
- Likes
- 23
- Downloads
- 262
- Makes
- 2
- Views
- 998
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Print in place but it does require supports to be generated at the bucket hook. I have included a .3mf for Orca Slicer 2.0 that I used to print the model with a Bambu X1C.
I suggest 3 walls and 20% infill or greater for sufficient layer adhesion strength at the bucket hook.
Due to tight tolerances and thin webs this model is best printed with a 0.4mm nozzle.
Note that the original .stl model is larger filesize with higher fidelity. The .3mf has less fidelity.
Provide your own ramp, bucket, and bait. Can be used as a kill trap with 2" of water or antifreeze, or a live trap with a soft material in the bottom that mice can't jump from.