Bucket Mill Mouse Trap (Print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mill-style mouse trap prints in place and clips on the rim of a standard 5-gallon bucket.
- Ocena
- 4,667 / 5
- Polubienia
- 23
- Pobrania
- 265
- Wydruki
- 2
- Wyświetlenia
- 1004
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in place but it does require supports to be generated at the bucket hook. I have included a .3mf for Orca Slicer 2.0 that I used to print the model with a Bambu X1C.
I suggest 3 walls and 20% infill or greater for sufficient layer adhesion strength at the bucket hook.
Due to tight tolerances and thin webs this model is best printed with a 0.4mm nozzle.
Note that the original .stl model is larger filesize with higher fidelity. The .3mf has less fidelity.
Provide your own ramp, bucket, and bait. Can be used as a kill trap with 2" of water or antifreeze, or a live trap with a soft material in the bottom that mice can't jump from.