Cabinet Shelf Support - Reinforcement with Angle Steel bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Center support for lengthy shelves in home cabinets. Reinforcement made with a Angle Steel bar of 25mm of side.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 26
- Makes
- 0
- Views
- 522
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
The missus of the house wanted more shelves in the house cabinets. Carpenter ask for alot of money. So i bought some compressed wood boards painted them in white and made some 3d printed supports. The shelves have alot of length so to avoid any bend i design these simple supports to use a L shaped or angle steel bar to reinforce. The steel bar in this orientation has alot of support strenght and doesn't bend easily.
I used 25mm Angle Steel bar, and the supports are fixed to the cabinet with normal M4 wood screws.
The other supports seen in the images are:
https://www.printables.com/model/291536-shelf-support-shelf-holder-shelf-pin-shelf-bracket
and
https://www.printables.com/model/470565-shelf-mounting-corners
I was able to make the shelves for 1/10 of the carpenter quotation. Probably not has good job or as seamless but it does the job very well.
I printed these parts on a Voron printer with 0,6nozzle, 3perimeters, 25%infill and in regular PLA.