Cabinet Shelf Support - Reinforcement with Angle Steel bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Center support for lengthy shelves in home cabinets. Reinforcement made with a Angle Steel bar of 25mm of side.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 517
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
The missus of the house wanted more shelves in the house cabinets. Carpenter ask for alot of money. So i bought some compressed wood boards painted them in white and made some 3d printed supports. The shelves have alot of length so to avoid any bend i design these simple supports to use a L shaped or angle steel bar to reinforce. The steel bar in this orientation has alot of support strenght and doesn't bend easily.
I used 25mm Angle Steel bar, and the supports are fixed to the cabinet with normal M4 wood screws.
The other supports seen in the images are:
https://www.printables.com/model/291536-shelf-support-shelf-holder-shelf-pin-shelf-bracket
and
https://www.printables.com/model/470565-shelf-mounting-corners
I was able to make the shelves for 1/10 of the carpenter quotation. Probably not has good job or as seamless but it does the job very well.
I printed these parts on a Voron printer with 0,6nozzle, 3perimeters, 25%infill and in regular PLA.