45° Nintendo Switch Desk Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
45° angled desk stand for Nintendo Switch 1 & 2 with charger cable cutout. Printable w/ no supports and in low quality.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 51
- Makes
- 0
- Views
- 231
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
This stand is perfect for playing Switch sitting at a desk. The ideal distance from the edge of the table is about where your knees are.
I tried other models but they either didn't have cutouts (or enough clearance) for a charger cable or had too shallow of a viewing angle, whereas this one sits at 45°
Separate models are included with a lower front retention wall for devices with a smaller bezel size, like the Switch OLED and Switch 2.
The model consists of two parts that slot into each other.
The mechanism was tested to fit snugly with a layer height of around 0.2-0.25mm.
For extra security, I used superglue between the halves.
When loading the models into your slicer, rotate them so the holes and pegs point upwards.
If your printer frequently experiences warping, consider printing with a brim.