45° Nintendo Switch Desk Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
45° angled desk stand for Nintendo Switch 1 & 2 with charger cable cutout. Printable w/ no supports and in low quality.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
This stand is perfect for playing Switch sitting at a desk. The ideal distance from the edge of the table is about where your knees are.
I tried other models but they either didn't have cutouts (or enough clearance) for a charger cable or had too shallow of a viewing angle, whereas this one sits at 45°
Separate models are included with a lower front retention wall for devices with a smaller bezel size, like the Switch OLED and Switch 2.
The model consists of two parts that slot into each other.
The mechanism was tested to fit snugly with a layer height of around 0.2-0.25mm.
For extra security, I used superglue between the halves.
When loading the models into your slicer, rotate them so the holes and pegs point upwards.
If your printer frequently experiences warping, consider printing with a brim.