1 / 1
Half inch bolt spinner for hand-tightening
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modeled this for work where I normally need to partially screw in and unscrew 1/2 in bolts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I modeled this for work where I normally need to partially screw in and unscrew 1/2 in bolts. It includes a hole at the top for a lanyard or other string so you can tie it to something/yourself.
This model could be parameterized for use on various bolt sizes, but I only needed this one size, so I didn't do any others.
ABS or ASA 100% for strength, although for my purposes PLA at 50% did just fine.
Plate supports necessary for the center portion.