AGT Vulcan 3 Moderator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moderator for Vulcan 3, utilises original moderator front cap. Simple and lightweight design.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 135
- Makes
- 0
- Views
- 898
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a simple moderator design that utilises original front cap of the original moderator.
Original moderator is a hollow tube with a spring wrapped in a carpet so I thought to make something simple but a bit better
Using original front cap ensures concentricity and axial alignment
As with all 3D printed round objects, printer calibration is important so use XY compensation if needed. On my printer I don't have to but every printer is different
There are 3 versions for .22, .25 and .30 cal with 7mm, 8mm and 9mm holes respectively
Last 2 chambers are vented to reduce pressure chasing the pellet and aid in sound moderation