Tamron 70-180 F2.8 Zoom Lock.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple lock ring that snaps in between the gap in the barrel extension that keeps the lens locked at 180mm…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple lock ring that snaps in between the gap in the barrel extension that keeps the lens locked at 180mm and prevents any creep from happening.
Please note that this is for the original version of the lens, meaning NOT THE G2. I do not have the G2 therefore I cannot verify that the extension length, barrel diameter, or the design is compatible.
Print with any .2 or .3 mm setting.
The part shown in the picture is printed in PETG.
V1: Original Design but the cutout isn't really big enough to slot in without breaking a couple of inner walls.
V2: Updated design with a much bigger gap to allow the part to snap onto the lens better.
Print Settings
Printer Brand:
Voxelab
Printer:
Aquila
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.27
Filament: OVERTURE PETG
Grey
Notes:
I used 3+ walls to make the entire part just the outer and inner walls. Printed so that the curves are on the x and y axes.
Category: Camera
