Tamron 70-180 F2.8 Zoom Lock.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple lock ring that snaps in between the gap in the barrel extension that keeps the lens locked at 180mm…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple lock ring that snaps in between the gap in the barrel extension that keeps the lens locked at 180mm and prevents any creep from happening.
Please note that this is for the original version of the lens, meaning NOT THE G2. I do not have the G2 therefore I cannot verify that the extension length, barrel diameter, or the design is compatible.
Print with any .2 or .3 mm setting.
The part shown in the picture is printed in PETG.
V1: Original Design but the cutout isn't really big enough to slot in without breaking a couple of inner walls.
V2: Updated design with a much bigger gap to allow the part to snap onto the lens better.
Print Settings
Printer Brand:
Voxelab
Printer:
Aquila
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.27
Filament: OVERTURE PETG
Grey
Notes:
I used 3+ walls to make the entire part just the outer and inner walls. Printed so that the curves are on the x and y axes.
Category: Camera